Bridgeport Corner
Spotlight Information Page
<--Click the Image
Links are included for the machines that we have the deatails available. We are in the proces of consolidating the Inventory list. Please be patient and check back often. Updated November 99,2019
Trade in policy features trade in at full face value to upgrade or replace any machine you purchase from us for up to 1 year from sale.
5hp air compressor, Kellogg, 220-4401750 motor, 60 gallon tank
Ingersoll Rand 80 gal Sold
5HP 80gal Binks Air compressorSOLD
Welder, Lincoln, 250 amp AC/DC
LN-7 GMA Control Wire feeder with gun and cables $750
Thermal Arc PAK 5XR Plasma cutting system $250
10Ib, Henkel rod heater, Model k-15, 110 single phase, 100 Watt $40.00 each
60 in stock
Heat Treat Oven 12” x 10” x 16 deep, K.H Huppert Co, 2000 degree, 220 volt 3 phase $1,250.00, Extra heating elements included
Johnson Furnace with Controller $1,500
Champion Forge $500
Speedy Melt B-300 $500.00
Cincinnati Sub Zero Freezer $500
Aztech Radiant Heater ceiling panels $50 each
Assorted Drill Bits
Carlton radial arm drill 3’ x 9”, #4 MT, 12 speeds 80 – 1500rpm, power feed
Powermatic Model 1200 $1,800
Radial Drill, Mas, Model VO 50, 4 ft x 20”, #5 Mt, Speeds 28-2500 RPM, Power Clamping, Box Table, Power Feed, Very heavy duty, Excellent Condition $ 11,500.00 (Video)
28” Drill Press, 30C 334 Cleereman, Geared head machine , Round Column,
28” round table ,Power Feed, Sliding Head, #4 MT, 40 - 1000 RPM, 5 HP, $4,250.00
28” Drill Press, 30C 648 Cleereman, Geared head machine , Round Column,
28” round table ,Power Feed, Sliding Head, #4 MT, 40 - 1000 RPM, 5 HP, $4,250.00 (Video)
18", Drill Press, Edlund, Model 2B-8, Round Column, Sliding Head, #3 Morse Taper, 7-1/2" Spindle Travel, (8) Speeds 176- 2380 rpm, 1 hp. 220/440 V 3 phase, $2,250.00
26”, Alzmetall #4 mt, Speeds 32 -1720 rpm, Power feed, 8-1/2” quill travel, $3,750.00
28”, Drill Press, Summit, Model 3XHD, Serial # 1844, Round Column, Oil Table 22" x 22", #5 MT, speeds (9) 54 - 1338, Power Feed (4) .003, .006, .009 & .013 tpr, 10" spindle travel , coolant, Maximum Distance from spindle to base 54", Excellent Condition $ 9,250.00
3' x 9", Radial Drill, Bickford "Chip Master" Giddings & Lewis, Type 951, Serial 00243, Year 1965, spindle speed (9) 90 to 1800 Rpms, Power Feed (4) .002, .004, .007 & .010, Spindle Travel 10", Taper #4 MT, Max. , Table 24" x 20" , Coolant, Motor 220/440 5 hp, $6,900.00 Looks New!
6’ x 15" American, # 5 MT. (24) speeds 20 -1600, Power Feed, Power Clamping, 15 hp , "L" type base with two tables, $9,250.00
6'x17" Fosdick Radial Arm Drill $12,500
6’ x 19" Carlton # 6 mt. (36) speed, 15 - 1500, Threading & Power Feed , Power Clamping, Motor 20 hp $4,750.00
Gang Drill Press, 13 " Powermatic, 2 Spindle, Model 1150A, Serial #1 9115V085
#2 9115V086, Variable Speed 480 – 4800, Motor Single Phase ¾ HP , 110-220 V
Spindle Travel 6”, Table 65” X 19 ½”, Max Height Under Spindle 29", ½” Jacobs Chuck, Oil Table $ 1,500.00
Gang Drill, 21” Cincinnati Super Service, 3 Spindle Drill Press, Speeds (9) 75-1500rpm, Power Feed, Box Column, Oil Table, Coolant, Sliding Head, Heads on 20” Centers, #4 Morse Taper, Motor 3 hp. 220/440 volts $ 6,750.00
Gorton Tool #265-6 $250.00
Superior Hone Model UCP $1,000.00
Oliver 610 Drill Bit Grinder $1,750.00
Band Filer, Doall filing machine 16” , Model # BF-3, Assortment of files
Pedestal Grinder $550
8x24, Covel surface grinder, Serial 35B-1553, Fine pole magnetic chuck, 12 x 1 1/4 wheel size, Dresser, 3 wheel speeds, Hydraulic, $4250.00
6x18, Chevalier, Model FSG618, Fine pole permanent magnet 6inch wheel $2,500.00
Hanchett AK-170 Knife Grinder, 170” length stroke,15-HP grinding head motor with 20″ segmental chuck, hood-mounted wheel dresser, 8″ x 8″, 360-degree swiveling knife bar. Hydraulic carriage, Adjustable stroke control, Variable-rate infeed, Motor-driven, recirculating way lubrication system, Recirculating flood-coolant system, Worm & gear knife bar turning. Air clamping $12,500.00
10" X 28", Cylindrical, Jones & Shipman, Universal, Hydraulic, Wheel 12" x 1" $4,250.00
10" x 36" Cylindrical, Brown & Sharpe, Wheel 14" x 1", Universal, Hydraulic,With tooling $5,750.00
6” x 12” Surface Grinder, Boyar – Schultz, 1 hp 220/440, Per Mag Chuck, Wheel 7" x 1/2". $1,250.00
6" x18", Surface Grinder, Reid, 1 hp. Motorized Spindle, wheel Size 7" x 1/2",No Chuck, Manual, Dry, $575.00
6" x 18" Gallmeyer & Livingston, Model 2, Surface Grinder, 1 hp motorized spindle, Serial 3-20143, 1966, 6" x 18" PM Chuck $1,250.00
6" x 18" Surface Grinder, DoAll, Hyd., Per mag chuck Fine pole, Wheel Size 8" x 1/2",
electric lube system 1 hp 220/440 volt spindle Coolant $5,250.00
16” x 60”, Surface Grinder, Thompson 20” x 4” wheel, 30 hp., Hydraulic $14,500.00
Tool & Cutter Grinder, Cincinnati Milacron, Monoset, Model MT, Serial Number: 4898A01181-0036, Voltage 220 /460, Tooling: Collets: Small set 1/8", 3/16", 1/4", 5/16" & 3/8",With adapter to fit spindle, Large Collets: 5/8", 3/4", 7/8", 1", 1-1/8", & 1-1/4" Holders: These fit in spindle #5 B&S, #9 B&S, # 7 B&S, # 2 Morse Taper, # 3 Morse Taper,# 4 Morse Taper Index Plates: 9 ea. Wheel Mounts: 8 ea. $9,500.00
Strato-Lift Man Lift
Drexel Battery Operated Forklifts (2)
Presto XL48-40 lift table $2,250.00
Big Joe Stacker lift 1500 lbs Model 1518-A7 $1050
1-1/2 T Hoist, C&M, $2500
2 Ton Hoist, C&M, Model 5826-2, cable type, Top running $1,250.00
Many crane hoists in stock, call for more information
7.5 Ton DeShazo Overhead 2 beam Hoist $8,500 each
7.5 Tone Yale overhead crane $8,500
OTC Engine Hoist
Lathe Chuck Size Chart
Taper charts (Morse, Jacobs, B&S, Jarno, Top)
Turret Lathe, TSUGAMI made in japan, model# TSPL
6” 3 jaw chuck with bolt on jaws, variable speed 120 - 3000 RPM
7 position turret, maximum distance from chuck to turret is 10” $2,500.00
10” x 20” South Bend Lathe, Catalog Number: CL 8187 ZB, Serial Number:10446RKX14X,Spindle speeds (12) 56-1350rpm, with belt changes and back gear, 2 sheeves on motor pulley, Spindle hole 1.410, Swing over ways 10-1/8" , Thread Dial, Taper Attachment, 6" 3 jaw chuck with bolt on Jaws, Tailstock taper #2, Thread range (70) 4 to 480 tpi, Motor: 1Hp 208/220/440 3 Phase 1750 RPM, Frame 132 $1,950.00
12” x 36” Lathe, Clausing, nose - L0, 1-5/8” spindle hole
variable speed, spindle rpm 52-1800 RPM, 8” 3 jaw chuck, Hard ways $2,500.00
12" x 50", South Bend Lathe Catalog # CLO 1450 8" 3 jaw chuck, D1-4 Spindle Nose, 1-1/2" spindle Hole, 8 speeds 40-940 rpm, inch & Metric cross feed dial, Thread Range 4 to 208 TPI, Taper Attachment, Thread Dial, Hard Bed Ways, Motor 2 hp 220/440 3 ph. $sold
13x40 2005 Enco Model 510-2585 damaged sold
Jet 1340 gap bed $4,200
14” x 56”, Gap 5” x 18”, Oerlikon lathe, Taper attachment, 1 1/2 spindle hole, 8” 3 jaw chuck
16 inch 4 jaw , Steady Rest and follower Rest $1,000.00
14” x 54” South Bend, Belt Drive, Screw on nose, Taper $1,750.00
14" x 40" Kingston, Gap Bed, JC6236, 5HP, $5,700.00
14" Monarch 14C $2,750
15 x 36 Southbend Nordic 15, 3 jaw southbend chuck, taper attachment, coolant pump, $2,500
15” x 48” LeBlond Servo shift L-0 nose, Hard ways, 45-1800 (12) speeds, Serial # 6C281 $2,500.00
15" x 48" Fimap ,Gear head, inch & metric threading, taper, #4 mt, speeds (12) 39-1780, spindle hole 1- 3/8", D-1-5 nose, 8", 3 jaw chuck, Made in Italy, $2,500.00
15" x 54" LeBlond Regal Servo Shift, Taper Attachment Jacobs Collet Chuck steady rest,
3 & 4 jaw chucks, inch & metric threading, spindle nose L-1, $8,750.00
15" x 54" Monarch, Model 60, Year 1952, Speeds (16) 24-1000, D-1-6 Spindle, 1-3/4" hole, Thread Dial, Micrometer Stop on Carriage, Quick Stop Threading, Reversing Lead Screw, #4 Tailstock taper, Flame Harden Ways, 4 Jaw Chucks, Quick Change Tool Post Set, Drill Chuck & Live Center sold
15” x 56”, LeBlond Regal, L nose, Taper attachment, 8” 3 Jaw Chuck, 45-1800 rpms
Insert type harden bed ways, Thread Dial, Serial # 8C3839 $2,250.00
16" X 40", South Bend, Model GS 39, Serial # 20202, Gap bed 26"X 4", , 12 speeds 40- 1400, # 4 mt, spindle hole 1-5/8", inch & metric, thread dial. $ 2,250.00
16" x 40" Nardini, MSC 1640E , Gap Bed $4,750.00
17” x 42” Lathe Cincinnati Tray Top , Servo shift 25-980 RPM,
1-3/4” Spindle hole, Taper Attachment , #4 MT taper $3,750.00
17” x 60” South Bend Turn-Nado , D1-8 Nose, Spindle Hole - 2 ¾” Speeds (9) 60-1050 RPM, 6” Steady rest, Follow rest, 10” 3 Jaw chuck, Taper Attachment, Quick change tool holder with 1 tool holder, Thread Dial, sold
17" x 120" Cincinnati Hydrashift, SOW 17-1/2", Spindle Hole 1-3/4",
Spindle Speeds (12) 25-980 Spindle nose L-1, Steady Rests 2 ea. 5" & 8-1/4", Follower Rest Taper attachment, #4 mt tail stock, 15" face plate. Motor 5 hp 220/440, $8,950.00
18" x 54", Lodge & Shipley, Model 1610 Power Turn, Serial No. 47564, 1968, 24 speed, 21 - 1740 rpm, D-1-6 spindle nose, 2-1/16 hole, Thread Dial, Harden bed ways, #5 Mt Tail Stock, 20 hp., Steady Rest, Quick Change Tool Post, $7,250.00
18" x 78", Lodge & Shipley, Model 1610 Power Turn, Serial No. 45290, 1963, 24 speed, 21 - 1740 rpm, D-1-6 spindle nose, 2-1/16 hole, Thread Dial, Harden bed ways, #5 Mt Tail Stock, 20 hp., Steady Rest, Quick Change Tool Post, $7,250.00
18" x 78", Lodge & Shipley, Model 1610 Power Turn, Serial No. 47166, 1967, 24 speed, 21 - 1740 rpm, D-1-6 spindle nose, 2-1/16 hole, Thread Dial, Harden bed ways, #5 Mt Tail Stock, 20 hp., Steady Rest, Quick Change Tool Post, $7,250.00
20" x 60", Daewoo / Ikegai, Serial Number 150003, year 1979
Spindle Speed (12) 18 - 2000 rpm, Spindle Nose D-1-8, 3-1/16 " spindle hole, Ball screw type Lead and Cross Feed Screws, inch and metric threading, 12" 3 jaw chuck, Tailstock 3 speed with #5 MT, $8,00.00
21"x60" Birmingham DL-1860 $5,000
24" X 86" SIRCO, GAP BED ENGINE LATHE
26"x80" Tarnow 50M63 $8,250
28" x 168",, LeBlond Heavy Duty, 31" swing over ways, 18" all steel 4 jaw chuck, 13" Steady Rest roller type, thread dial, rapid traverse on carriage, #5 MT tail stock, (16) spindle speeds 6.5 to 400rpm, 2-1/8" spindle hole, 30 hp motor, Rack Type Tail Stock Lock, $4,250
30" x 180", Monarch lathe Model 27" N, Year 1945, D-1-8 spindle nose, 2-1/4" hole, Taper Attachment16 speeds. 8-302 rpm, 24" roller type steady rest, 13" roller type Steady rest, Tailstock taper #5 mt, 18" 4 jaw chuck $Sold
32" x 276” Hankook, Model HPL, 3-3/8" hole, D-1-11 nose, Gap bed 42" x 8-1/2" 14 speed. 9-800 rpm, Serial # 1870861101, 4-3/8" quill. # 5 mt Taper Attachment, 2 steady rest 14" & 10", Lock rack for tail stock, Rapid Traverse, 24" all steel Buck chuck with bolt on jaws, Mfg. South Korea 1986, $32,500.00
38" x 96" Axelson 24 , raised, 2 ea. Steady rest 21" & 30" $10,500.00
Super Max Mill HEAD $250
Gorton Mill HEAD $650
Gorton Tracer Mills $1,250 each (4)
Bridgeport power feed $225.00
9” x 42” table,Jet, Vertical milling machine, 2 hp motor, 16 spindle speeds 50-5400, 1987 model $1,250.00
9" x 36" Table, Bridgeport Mill , DRO, power feed x axis, chrome ways $Sold
9" x 48" table, Bridgeport, 2hp variable speed head, 2 axis DRO, Powerfeed , Chrome ways, Serial BR280161 $8750.00 EXCELLENT CONDITION Sold
9" x 42" Jet, 1 hp Step pulley head, R-8 Taper (8) speeds 55-2300, power feed on quill, $2,250.00
9” x 47” Vertical Milling Machine, Index, 1 HP Step Pulley, #9 taper, Power Feed on Table,
Shaping Head for cutting splines and internal keyways, $2,950.00
9" X 46", Wells Index Vertical Mill, Model 847, Ser. # 20977, R-8 taper, 2 hp 220/440 motor, 52-4200 rpm, 6" spindle travel, power feed on quill. $4,250.00 Made in USA
10” x 42”, Vertical Mill, Tree, Model # 2UV, 1HP, Variable speed head, #9 B&S Taper
Power Feed, Vise $1,250.00
10" x 39", Jarbe , Milling Machine Horizontal, 65V-F1, table #40 taper, (12) speeds 50-1250 rpm, Power feed on table $2,750.00
10" X 50" Kearney & Trecker, Horizontal, MODEL 2 H, Rapid Traverse, Power Feed, Speed 35-1400 $ 1,250.00
12” x 54" Bridgeport, Horizontal with Vertical head,#50 taper, power and rapids, (20) speeds 70- 1500rpm, Universal $6,750.00
13-1/2"" X 64", KEARNEY & TRECKER, HORIZONTAL MILL, # 3 CH UNIVERSAL, #50 TAPER,
VERTICAL HEAD, DUAL CONTROL, 10 HP., 15 -1500 RPM SOLD
13” x 60” Varnamo, Table Vertical Head W/ Down Feed on Quill, Model FU-3, Serial # 1601, Speeds 34 to 1500, #50 Taper, Power Feed & Rapid Traverse $2,500.00
14" x 59" Cincinnati Milacron, Horizontal Mill, 210-14 Model LL with motorized vertical head, Dial type , hor speeds (24) 18-1800, vertical speeds (8) 100 to 1500 , dual controls, Serial # 31042P78-0005 $11,500.00 (Video)
15"x52" Cincinnati #3 Horizontal Milling Machine
16" x 30" Kearney & Trecker #2D, Spindle Speeds 15 (250-4000) Step Pully,Rotary Head Speeds Dial 16 (1/5 – 3), $3,250.00
16"x63" WMW Heckert FSS 400x1600 Vertical Mill, #50 taper, with tooling, 440/ 3 phase, 9,000 lbs $11,500
16”x78” Horizontal Mill, Cincinnati #4, Dial type, 450 rpm, Table Dual controls#50 taper, Vertical head, A&B outboard supports, Vertical Head
16" x 68" Cincinnati Milacron 315-16 VDT Model LL $7,500.00
20" X 86" Cincinnati Vertical Milling Machine, Dial Type, Model # 425-20-VHP,Serial # 31054V5U-2 ,#50 Taper, Spindle Speeds 16-1600 RPM, 6" Spindle Travel , Rapid Traverse, Dual Hand Cranks $11,500.00
Planer, Open Side, 8’x 24”x 24” Rockford Hydraulic, Top Head & Side Head, 20 HP $9,750.00
Roper Whitney Apron Brake $1,850.00
2 Ton Hydraulic Bench Press, Phoenix, Model PHN.1.2, Ser. 60191, $2,750.00
10 TON , OBI, BENCH MASTER, LIKE NEW, $1,850.00
25 ton, C type, Hydraulic Press, , Hannifn, , 18" stroke, 22" open height, 18" x 20" bed area, foot control, Floor area 20" x 42" $7,850.00 Great for broaching key ways
35 Ton, OBI, Bliss, Model C-35, Slide Adjustment 2-1/2", Stroke 3", Shut Height on Bed 10-3/4". Bed: L-R 26", B-F 17-1/2", Ram: L-R 12-1/2", B-F 9", Air Clutch $9,750.00
60 Ton, Rousselle straight side press, 70x24, Model 65572, 110 strokes per min, Shut height 18 inches, Serial 26082, Air clutch, $7,250.00
90 Ton Press Brake, Chicago D & K, Mechanical, 127” Between Housing, 12’ overall, Serial 10138, lots of dies $ 7,500.00
Radial Arm saw head $125.00
Shop Table Saw $50
Panel Saw, Pro Max, for wood, 48” cross cut. $700.00
MARVEL 6A Power hacksaw SOLD
9" x 16" Band Cutoff, Dayton, 3/4 blade, coolant, step pulley drive $1,750.00
9" x 16", Band Cutoff, DoAll model C-916, 1" blade, Variable speed, Coolant $2,250.00
9" x 16", Band Cutoff Kalamazoo, Model 9AW, 1" Blade, Coolant $2,950.00
9" x 18" Grob Inc 4V-18 Vertical Saw SOLD
10" x 36" Grob Model Type NS-36 $1,250.00
12" Saw, Cold, Eisele, VMS -11, 40 -80 rpm, 460 volt 3 phase, Miter Cut, 1987 $1,750.00
13"x20" Startrite 20F $3,250.00
13"x40" Enco model 92256 $2,200.00
13" x 18" Band Cutoff, Kalamazoo Model 13D , 1" blade $2,750.00
14" Cold Saw, Scotchman Bewo, Miter Cut, Coolant, Model CPO350LT, S/N:1422 Mfg: 1990 $1,950.00
14” Friction Saw, Cutoff
14” Round, Hacksaw, Peerless, Blade 24” x 1-7/8”, 5 hp. 220/.440vCoolant, Ft. Print; 78” x 42” x 68”, Serial Number 42-041-78, Coolant $4,250.00
14"-16" Everett Abrasive Cutoff Saw $900.00
16” DeWalt Radial Arm Saw, Model G, Serial # 51622, Set up for cutting non- ferrous metal, Carbide blade, Hand crank power feed , Maximum crosscut - 24 in $ 900.00
16” Round, Racine, Hack Saw, Blade 24” x 2”, 5 Hp, 220/440 $5,250.00
16" X 22", Amada Model H-450HD, 1-1/2" blade, stock advance, 2 ea. Roller Conveyor, 5 speeds, $10,500.00
18" x 20", Vertical Cutoff, Marvel #81 18" Model 81-9/M8, Series 81-9, Serial # F-362268-1, 1-1/4" Blade, Hydraulic Vise $9,975.00
60" Contour Saw, DoAll, Speed Variable 50 - 2045 fpm, table 66" x 30", maximum cutting height 13", Blade Welder $7,250.00
Shear, Hydrapower, Model SH-2012, 12’ x ¼” , Variable Gap, Front Operated Power Back Gage, Extra Set of Blades, Good Condition, Just taken from service, American Made $ 22,500.00
Shear, Pexto, 10 Ga x 10’ Mechanical, Model S31220A, No back gage, Serial #12843/30 SOLD
Notcher, Heck, 8” x 8” x 6mm Hydraulic, $6,500.00
16ga x 36" Di- Acro, Model 36, rear operated back gage SOLD
Shear, Cincinnati Model 2516G, 16’ x 3/16” $25,000.00
6” Mill Vise
Set of R-8 Collets
Collet Chuck Set $250
Reamer Set 15/32 "- 1-1/2" missing 21/32-23/32 $150.00
D'Andrea Sensitiv TA-170 Boring Head $SOLD
Drill Chucks, 1 ea. R-8 & 1 ea. #4 MT
#50 Mill arbors, 1” & 1-1/4”
#50 End Holders
Live center
400lb of side cutters and shell mills used
Angle Plate - 16 in x 14 in $175.00
Skyhook by Syclone products, 500 lb lifting capacity, Mounts 3 inch Aloris tool Post $400.00
Positioning Table, No name, 5 axis, Manual, Table 19” x 11” $1,500.00
Rotary Table, Hass CNC Model ET200V, 8” $1,000.00
Motor 50 Hp, Reliance Electric, 1750 rpm, 220/440, 60hz, Frame 326T $1,200.00
Fire Blankets 33" x 110' $ 300.00 each (New)
Scofield Steam Engine and Boiler
1957 BMW Isettas (3)
Safe $250.00
Marsh Stencil Maker Model R 1"
55 gal Drum Rack $40 each
Micheal Shred'n Baler paper shredder $1,950.00
Generator Model MEP-016A $550.00
Toledo 722 Pipe threader $550.00
Micro film reader. $35.00
Wire EDM, Agie cut, Type NC15-1, Serial number 107, $900.00
Jig Borer, Sip, 25" x 24" table, speeds (20) 50-2000rpm $3,500.00
Bridgeport Corner
Spotlight Information Page
<--Click the Image
EXCLUSIVE CONTENT Sign up here to get the latest Machine Listings before they are posted for the public!
This beautiful car is for sale
1934 Packard
Information Page
